Projects
Name of the InvestigatorTitle of the project and durationAmount sanctioned(in Lakh)Funding Agency
Dr. Akhilendra Singh Design Analysis of Composite Patch Repair of Structural Members by Meshfree Method
(2010-2014)
₹12 lakhs DST
Dr. Karali Patra & Co- Principal investigator- Dr. Shovan Bhaumik Studies on Maxwell Stress and Hysteresis Characteristics of Poly Acrylic and Silicone Based Elastomer.

(Completed)
₹9.95 lakhs Ministry of Defense
Dr. Karali Patra Multi-sensor based intelligent tool condition monitoring in mechanical micromachining
(2010-2014)
  DST
Dr. Mohd Kaleem Khan Evaluation of Burst Criterion of Zircaloy Clad

(Completed)
₹25.445 lakhs Atomic Energy Regulatory Board, DAE
Dr. Somnath Sarangi Inelastic Effects in Elastomers- Theoretical and Experimental Study.
(2010-2013)
₹15.07 lakhs DST
Dr. Somnath Roy & Co- Principal Invistigator Dr. Somnath Sarangi Fluid-structure interaction in micro-turbine blades.
(2014-2017)
 ₹21.6 lakhs CEE, IIT Patna
Dr. Sudhanshu Sekhar Panda Drilling of Human Bone for minimal bone tissue injuries. ₹12.84 lakhs Department of Science and Technology
Dr. S. S. Panda& Dr. S. Roy Monitoring of heat flow phenomenon of a low freezing material during continuous casting 19.08
(2013-14)
BRNS(DAE)
Dr. P. Saha Development of a real time tool wear monitoring and compensation method for RuEDM and micro EDM drilling process 20.75
(2013-14)
SERB(DST)
Dr. A. Thakur Robust motion planning for amphibious bio-inspired robots 17.80
(2013-14)
SERB(DST)
Dr. Somnath Roy & Co- Principal Invistigator Dr. Somnath Sarangi Fluid-Structure Modeling of Micro-turbine Blades.
(2014)
₹24.1 lakhs Center for Energy and Environment, IIT Patna
Dr. R. Raj Flow Boiling Heat Transfer in Scalable Nanostructured Micro channels for High Heat Flux Application 49.00
(2014-15)
SERB(DST)
Dr. S. Roy & Dr. S. Sarangi Immersed Boundary Simulation of low Reynolds Number Flow over Oscillating Airfoils 24.21
(2014-15)
ARDB
Dr. M.K.Khan& Dr. M. Pathak Influence of hydrogen content on burst characteristics of Ziracolly-4 cladding tube 26.65
(2014-15)
BRNS(DAE)
Dr. S. Sarangi Comprehensive Integrated Diagnostic Study of Clusters in State Bihar , India 5.40
(2014-15)
Govt. of Bihar
Dr. K. Patra Soft active dielectric elastomers for human motion-based energy harvesting 41.14
(2014-15)
SERB(DST)
Dr. Karali Patra & Co- Principal investigator- Dr. Shovan Bhaumik Mechanistic model for prediction of cutting forces in mechanical micro-drilling process
(2015)
₹6.66 lakhs SERC-DST (YS fast track project)
Dr. Somnath Roy, Dr. Somnath Sarangi & Dr. S.S. Panda Technical Tieup for Cluster Development.

(2015–2015) Completed
₹5.40 lakhs Government of Bihar
Dr. Somnath Roy & Co- Principal Invistigator Dr. Somnath Sarangi Fluid-structure interaction in micro-turbine blades.
(2014-2017)
₹21.6 lakhs CEE, IIT Patna
Dr. S. Sarangi Technology Gap Analysis Study for the Rice Milling Machinery Cluster in Raxaul, Bihar 6.00(2015-16) TIFAC
Dr. S. Sarangi Technology Gap Analysis Study for the Rice Milling  Cluster in Lakhisarai, Bihar 6.00
(2015-16)
TIFAC
Dr, R. Raj Enhancement of Boiling Heat Transfer via the Suppression of Coalescence in Microgravity 27.00
(2015-16)
ISRO
Dr. K. Patra Modeling and Analysis of high speed hybrid micro Machining 11.67
(2015-16)
SERB(DST)
Dr. R. Raj Acoustic Detection of Leidenfrost Dynamics on Scalable Micro-/Nano-Structured Surfaces 27.00
(2016-17)
DST
Dr. M. Pathak &Dr. M.K.Khan A self adaptive electronic cooling system by enhanced pool boiling 36.25
(2016-17)
SERB(DST)
Dr. A. Bhattacharya Influence of Secondary Heat in Friction Stir Welding: Mechanical Properties and Metallurgical Observations 16.03
(206-17)
SERB(DST)
Dr. S. Sarangi Technology Gap Analysis Study for the Agricultural Implements Cluster, Noorsarai, Nalanda, Bihar 5.11
(2016-17)
TIFAC
Dr. S. Sarangi Technology gap analysis for combined study proposal for the following clusters :  copper & bronze utensils clusters, Mahua, Vaishali, Brass & German Silver utensils cluster – Majhualia, Bettiah, Brass & Bell Metal cluster – Mahisadel, Purba, Medinipur , West Bengal 11.88
(2016-17)
TIFAC
Dr. S. Sarangi Technology Gap Analysis Study for Jhula Cluster, Kanhaiyaganj, Nalanda 5.11
(2016-17)
TIFAC
Dr. R. Raj Design and Development of an Agricultural Waste Based Gasified Heating System for GreenCHILL 95.00
(2016-17)
MHRD and DST under UAY
Dr. M. Tiwari & Dr. A. Singh Design of an Integral SFD 36.71
(2017-18)
ARDB
Dr. M. Tiwari & Dr. A. Thakur Development of Low Cost, Efficient Mechanism for collection of Garbage and Dirt- for Municipal Corporations, Panchayats 16.71
(2017-18)
Swachta Action Plan MHRD
Dr. M. Tiwari & Dr. A. Singh Development of Novel SMA Bearing Supports and Retrofit for Enhanced Performance and Durability of Rotating Machinery 180.00
(2017-18)
MHRD,Ministry of Power, General Electric
Dr. C. Sarkar & Dr. M. Pathak Modeling and experimental research wall bounded flow of magneto-rheological grease 19.2
(2018-19)
SERB-DST
Dr. A Mahato Design of asperity for textured metal surfaces to improve tribiological characteristics in sliding: an in-situ imaging approach 28.96
(2018-19)
SERB-DST
Dr. S.K. Paul Improvement of fatigue and ductile fracture behaviour of steel and aluminum alloy specimen by application of pulsed electric current 20.72
(2018-19)
SERB-DST
Dr. Mohd Kaleem Khan & Co- Principal Investigator- Dr. Manbendra Pathak Effect of burnup on ballooning and burst behavior of Zircaloy-4 cladding tubes under simulated LOCA(Ongoing) 32.991 Lakhs BRNS
HOD, Mechanical Eng. Strengthening Interfacial Characterization Facilities
(No. SR/FST/ET-II/2018/240C)(5 Yrs)
290 Lakhs DST under FIST program
Dr. S.K. Paul Effect of cyclic creep in rolling contact fatigue of railways 20.07 Lakhs ASEAN-India STI Cooperation (AISTDF)

Other Resource Generation Avenues (other than Sponsored Research Grants)


Name of the InvestigatorTitle of the project and durationAmount sanctioned(in Lakh)Funding Agency
Dr. R. Raj Performance analysis and improvement of 02 Tonne, 7 kw ammonia based adsorption refrigerator 1.51
(2014-15)
New Leaf Dynamic Technologies (P) Ltd
Dr. A. Thakur Consultancy services for preparation of detailed project report (DPR) OF Central Instrumentation-cum-Robotics Centre 2.00
(2016-17)
Govt. of Bihar
Dr. S. Sarangi To determine the fault features of Faulty Bearings of Induction Motor from Current signal and Power Factor Signal for very low sampled Data 0.66
(2016-17)
PSIPL
Dr. R. Raj CFD Simulation in a Co-Current Pressure Nozzle Spray Dryer 0.44
(2016-17)
HLCL
Dr. A. Thakur & Dr. M. Pathak Design and development of a motorized gate at RBI Patna 3.52
(2018-19)
RBI Patna
Dr. S.K Paul & Dr. A Singh Establish correlation between specimen level fatigue and cornering fatigue test 17.7
(2018-19)
Tata steel Jamshedpur
Dr. S.K Paul Determine hole expansion ratio (HER) from notch tensile test 17.7
(2019-20)
Tata steel Jamshedpur