1. High Concentration Fresnel Lens with Spherical Facets
Status: Granted (Patent Number: 502819)
2. Stepped Microchannel Heat Sink for Cooling an Electronic Device
Status: Granted (Patent Number: 506343)
3. Curved Serpentine Flow Inverter
Status: Granted (Patent Number: 508277)
86.Thermomechanical behaviour of Zircaloy-4 cladding in a two-step isothermal heating in the steam environment
Nuclear Engineering and Design, 2026, Vol. 453, p.114909
85. Critical heat flux enhancement using plasma-sprayed TiO2 coatings
Thermal Advances, 2026, Vol. 7, p.100138
84. Migration dynamics and hydrodynamic resistance of elastic vesicles in deformable stenosed arteries: A fluid-structure interaction study
Physics of Fluids, 2026, Vol.38, p.031906
83. Enhancement of pool boiling heat transfer using eco-hybrid nanofluids
International Journal of Multiphase Flow, 2026, Vol.196, p.105559
82. Electronic chip cooling using supercritical carbon dioxide in microchannels
Applied Thermal Engineering, 2025, Vol. 280 (Part 4), p.128436
81. Suppression of flow boiling instabilities in microchannel heat sinks using a passive vapor venting technique
Thermal Science and Engineering Progress, 2025, Vol. 65, p.103909
80. An experimental study of fast transient creep and corrosion of stainless steel (SS 316L) tubes in the steam environment
Engineering Failure Analysis, 2025, Vol. 179, p.109813
79. Hemodynamics and thermal characteristics of a deformable stenosed carotid artery with heat generation: Effect of heart rate, stenotic severity, and wall elasticity
International Communications in Heat and Mass Transfer, 2024, Vol.159, p.108236
78. Zircaloy-4 fuel pin failure under simulated loss-of-coolant-accident conditions: Oxygen embrittlement
Progress in Nuclear Energy, 2024, Vol. 177, p.105485
77. Numerical evaluation of nanofluid-based indirect liquid cooling of a Li-ion battery pack using equivalent circuit model under static and dynamic loading conditions
International Communications in Heat and Mass Transfer, 2024, Vol. 159, p.108079
76. Zircaloy-4 fuel pin failure under simulated loss-of-coolant-accident conditions: Creep and rupture
Nuclear Engineering and Design, 2024, Vol. 428, p.113507
75. Thermal management of high-energy lithium titanate oxide batteries using an effective channeled dielectric fluid immersion cooling system
Energy Conversion and Management, 2024, Vol. 313, p.118644
74. Flow boiling characteristics in a microchannel heat sink with a condensing cover plate
Thermal Science and Engineering Progress, 2024, Vol. 53, p.102707
73. Bubble interaction and heat transfer characteristics of microchannel flow boiling with single and multiple cavities
ASME Journal of Thermal Sciences and Engineering Applications, 2024, Vol. 16(6), p.061010
72. Combined Effect of Structured Surface and Biosurfactant in Pool Boiling Heat Transfer Enhancement
International Journal of Heat and Mass Transfer, 2024, Vol. 221, p.125102
71. Performance Investigation of a Solar Air Heater Artificially Roughened with Joukowski Airfoil Ribs
ASME Journal of Solar Energy Engineering, 2024, Vol. 146(1), p.011004
70. Effect of stenotic shapes and arterial wall elasticity on the hemodynamics
Physics of Fluids, 2023, Vol. 35, p.101908
69. Electrowetting-assisted pool boiling heat transfer characteristics under low gravity conditions
International Journal of Thermal Sciences, 2023, Vol. 192, Part B, p.108440
68. Thermal Analysis of Phase change material encapsulated Li-ion battery pack using multi-scale multi-dimensional framework
Journal of Energy Storage, 2023, Vol. 65, p.107290
67. Heat transfer characteristics of pool boiling with scalable plasma-sprayed aluminum coatings
Langmuir, 2023, Vol.39, pp.6337-6354
66. Efficient thermoelectric cooler for localized cooling in electronic devices
ASME Journal of Thermal Sciences and Engineering Applications, 2023, Vol. 15(8), p.081009
65. Heat transfer and flow characteristics of varying curvature wavy microchannels
International Journal of Thermal Sciences, 2023, Vol. 185, p.108096
64. Pool boiling heat transfer characteristics of a stepped microchannel structured heating surface
International Journal of Multiphase Flow, 2023, Vol. 160, p.104351
63. A hydrophobic porous substrate-based vapor venting technique for mitigating flow boiling instabilities in microchannel heat sink
Applied Thermal Engineering, 2022, Vol. 216, p.119138
62. Synergistic Effect of Zn Doping on Thermoelectric Properties to Realize High Figure-of-merit and Conversion Efficiency in Bi2-xZnxTe3 Based Thermoelectric Generator
Journal of Materials Chemistry C, 2022, Vol.10, p.7970
61. Transient Evolution of Electrowetting Induced Oscillating Droplets on Hydrophobic Substrates
Journal of Molecular Liquids, 2022, Vol. 353, p.118704
60. Stationary Point Focus Solar Concentrators-A Review
International Journal of Energy Research, 2022, Vol. 46(5), pp.5678-5702
59. A Wettability-mediated Microdroplet under Electrowetting Effect for Hotspot Cooling
IEEE Transactions on Components, Packaging and Manufacturing Technology, 2022, Vol. 12(2), pp.288-296
58. Enhancement of critical heat flux (CHF) in pool boiling with anodized copper surfaces
International Journal of Thermal Sciences, 2021, Vol.172, p.107338
57. Heat transfer characteristics of a closed-loop two phase thermosyphon system with a structured heating surface
ASME Journal of Thermal Science and Engineering Applications, 2021, Vol. 14, p.011013
56. A Novel High Concentration Fresnel Lens as a Solar Concentrator
ASME Journal of Solar Energy Engineering, 2021, Vol. 144, p.011006
55. Performance Comparison Among the Variants of Curved Serpentine Coil
Physics of Fluids, 2021, Vol. 33, p.073604
54. Electrowetting induced microdroplet oscillation over interdigitated electrodes for hotspot cooling applications
Experimental Thermal and Fluid Science, 2021, Vol. 125, p.110372
53. Thermohydraulic Performance of a Novel Curved Serpentine Coil
Physics of Fluids, 2020, Vol. 32, p.083609
52. Pool boiling heat transfer characteristics of a biosurfactant particle deposited heating surface
International Journal of Heat and Mass Transfer, 2020, Vol.163, p.120455
51. Natural convection of viscoplastic fluids in an enclosure with partially heated bottom wall
International Journal of Thermal Sciences, 2020, Vol.158, p.106527
50. Flow boiling characteristics in different configurations of stepped microchannels
Experimental Thermal and Fluid Science, 2020, Vol. 119, p.110217
49. A biosurfactant as prospective additive for pool boiling heat transfer enhancement
International Journal of Heat and Mass Transfer, 2020, Vol.150, p.119292
48. An improved mechanistic model for predicting bubble characteristic size in subcooled flow boiling
International Journal of Heat and Mass Transfer, 2020, Vol. 149, 119188
47. Design of Fresnel lens with Spherical Facets for Concentrated Solar Power Applications
International Journal of Energy Research, 2020, Vol. 44(1), pp. 460-472
46. A Novel Stepped Microchannel for Performance Enhancement in Flow Boiling
International Journal of Heat and Mass Transfer, 2019, Vol. 144, p.118611
45. Plasma Sprayed Copper Coatings for Improved Surface and Mechanical Properties
Vacuum, 2019, Vol.168, p.108834
44. Effects of flow loop components in suppressing flow boiling instabilities in microchannel heat sinks
International Journal of Heat and Mass Transfer, 2019, Vol.141, pp. 1238-1251
43. Design and Ray Tracing of Multifaceted Scheffler Reflector with Novel Crossbars
Solar Energy, 2019, Vol.185, pp. 363-373
42. Standard Rating Charts for Low GWP Refrigerants Flowing Through Adiabatic Helical Capillary Tube
ASME Journal of Thermal Science and Engineering Applications, 2019, Vol. 11(5), p.051015
41. Performance Evaluation of Coiled Tube Receiver Cavity for a Concentrating Collector
Renewable Energy, 2019, Vol.138, pp. 666-674
40. Pool boiling heat transfer enhancement with segmented finned microchannels structured surface
International Journal of Heat and Mass Transfer, 2018, Vol.127, pp.39-51
39. Design charts for Scheffler reflector
Solar Energy, 2018, Vol.163, pp.104-112
38. Effects of hydrogen on thermal creep behaviour of Zircaloy fuel cladding
Journal of Nuclear Materials, 2018, Vol.498, pp.20-32
37. Effects of delta-hydride precipitated at a crack tip on crack instability in Zircaloy-4
International Journal of Energy Research, 2018, Vol.42, pp.284-292
36. Numerical investigation of subcooled flow boiling in segmented finned microchannels
International Communications in Heat and Mass Transfer, 2017, Vol.86, pp.215-221
35. Investigation of elevated-temperature mechanical properties of delta-hydride precipitate in zircaloy-4 fuel cladding tubes using nanoindentation
Journal of Alloys and Compounds, 2017, Vol.726, pp.107-113
34. Solar air heater with hyperbolic ribs: 3D simulation with experimental validation
Renewable Energy, 2017, Vol.113, pp.357-368
33. 3D simulation of hydride-assisted crack propagation in zircaloy-4 using XFEM
International Journal of Hydrogen Energy, 2017, Vol. 42, pp.18668-18673
32. An analytical model for predicting growth rate and departure diameter of a bubble in subcooled flow boiling
International Journal of Heat and Mass Transfer, 2017, Vol.109, pp. 470-481
31. Performance evaluation of solar air heater with novel hyperbolic rib geometry
Renewable Energy, 2017, Vol.105, pp.786-797
30. Effects of hydride on crack propagation in zircaloy-4
Procedia Engineering, 2017, Vol. 173, pp. 1185-1190
29. Bubble dynamics and flow boiling characteristics in three different microchannel configurations
International Journal of Thermal Sciences, 2017, Vol.112, pp.371-382
28. Rupture behaviour of nuclear fuel cladding during loss-of-coolant accident
Nuclear Engineering and Design, 2016, Vol. 307, pp. 319-327
27. Transient heat transfer characteristics of segmented finned microchannels
Experimental Thermal and Fluid Science, 2016, Vol.79, pp.134-142
26. Clogging behaviour of elongated bubble in uniform and diverging microchannel
Proceedings of IMechE, Part C Journal of Mechanical Engineering Science, 2016, Vol.230(11), pp.1861-1875
25. Transient analysis of microchannel heat sink during single phase and flow boiling conditions
Applied Mechanics and Materials, 2016, Vol.819, pp.101-106
24. Performance enhancement of solar collectors-A review
Renewable and Sustainable Energy Reviews, 2015, Vol.49, pp.192-210
23. Rayleigh-Benard Convection in Herschel-Bulkley fluid
Journal of Non-Newtonian Fluid Mechanics, 2015, Vol.226, pp.32–45
22. Hydrogen in Zircaloy: Mechanism and its Impacts
International Journal of Hydrogen Energy, 2015, Vol.40(17), pp.5976-5994
21. A comparative study of flow boiling heat transfer in three different configurations of microchannels
International Journal of Heat and Mass Transfer, 2015, Vol.85, pp.711-7224
20. Thermorheological Characterization of Elastoviscoplastic Carbopol Ultrez 20 Gel
ASME Journal of Engineering Materials and Technology, 2015, Vol.137, pp.031002
19. Computational fluid dynamics modeling of two-phase flow in an adiabatic capillary tube
ASME Journal of Thermal Science and Engineering Applications, 2015, Vol.7, p.011006
18. Ballooning deformation of Zircaloy-4 fuel sheath
ASME Journal of Pressure Vessel Technology, 2014, Vol. 136, pp. 031206
17. Two-phase VOF model for the refrigerant flow through adiabatic capillary tube
ASHRAE Transactions, 2014, Vol. 120, Part-1, pp.60-67
16. Burst Investigation on Zircaloy-4 Claddings in Inert Environment
Annals of Nuclear Energy, 2014, Vol. 69, pp.292-300
15. Burst criterion for zircaloy-4 cladding in an inert environment
Nuclear Engineering and Design, 2013, Vol.265, pp.886-894
14. Natural Convection of Viscoplastic Fluids in a Square Enclosure
ASME Journal of Heat Transfer, 2013, Vol.135, p.122501
13. Inter-phase slip velocity and turbulence characteristics of micro-particles in an obstructed two-phase flow
Environmental Fluid Mechanics, 2013, Vol.13, pp. 371-388
12. A Review on the Clad Failure Studies
Nuclear Engineering and Design, 2011, Vol. 241(9), pp. 3658-3677
11. Metastable Flow inside Capillary Tubes- A Critical Review
ASHRAE Transactions, 2010, Vol. 116, Part-1, pp.478-487
10. Flow Characteristics of Refrigerants Flowing through Capillary Tubes - A Review
Applied Thermal Engineering, 2009, Vol. 29(8-9), pp.1426-1439
9. Performance Prediction of Adiabatic Capillary Tubes by Conventional and ANN approaches- A Comparison
ASHRAE Transactions, 2009, Vol. 115, Part-1, pp. 93-105
8. Experimental Investigation on Diabatic Flow of R-134a Through Spiral Capillary Tube
International Journal of Refrigeration, 2009, Vol.32(2), pp.261-271
7. Experimental Investigation on the Flow of R-134a through Adiabatic and Diabatic Capillary Tubes
ASHRAE Transactions, 2009, Vol. 115, Part-1, pp.82-92
6. Experimental and Numerical Investigation of the Flow of R-134a Through Lateral Type Diabatic Capillary Tube
HVAC&R Research, 2009, Vol.14(6), pp.871-904
5. Experimental and Numerical Investigation of the Flow of R-134a Through Lateral Type Diabatic Capillary Tube
HVAC&R Research, 2009, Vol.14(6), pp.871-904
4. An Experimental Study of the Flow of R-134a inside an Adiabatic Spirally Coiled Capillary Tube
International Journal of Refrigeration, 2008, Vol.31(6), pp.970978
3. Experimental Study of the Flow of R-134a through an Adiabatic Helically Coiled Capillary Tube
HVAC&R Research, 2008, Vol.14(5), pp.749-762
2. A Homogenous Flow Model for Adiabatic Helical Capillary Tube
ASHRAE Transactions, 2008, Vol.114, Part 1, pp. 239-249
1. Flow Characteristics of Refrigerants Flowing inside an Adiabatic Spiral Capillary Tube
HVAC&R Research, 2007, Vol.13(5), pp.731-748
1. A novel immersion cooling technique for thermal management of high energy Lithium-ion batteries
14th International Conference on Computational Heat and Mass Transfer (ICCHMT-2023), 04-08 September 2023, University of Applied Sciences, Dusseldorf, Germany
2. Enhancement of Pool Boiling Heat Transfer Performance by an EcoFriendly Surfactant
5th World Congress on Momentum, Heat and Mass Transfer (MHMT'20), Virtual
3. Design of Fresnel Lens With Constant Height Spherical Facets
ASME 2020 14th International Conference on Energy Sustainability (ES-2020), June 17-18, 2020, Virtual
4. A simplified frame design for Scheffler Reflector
11th International Conference on Sustainable Energy & Environmental Protection (SEEP-2018),8-11 May 2018, UWS Paisley Campus, Scotland, United Kingdom
5. Performance evaluation of coiled tube receiver cavity for a concentrating collector
11th International Conference on Sustainable Energy & Environmental Protection (SEEP-2018),8-11 May 2018, UWS Paisley Campus, Scotland, United Kingdom
6. A novel impinged surface for pool boiling heat transfer enhancement
10th International Conference on Boiling and Condensation Heat Transfer (ICBCHT-2018), 12-15 March 2018, Nagasaki, Japan
7. Flow Instability and CHF Characteristics in Segmented Finned Microchannels
10th International Conference on Boiling and Condensation Heat Transfer (ICBCHT-2018), 12-15 March 2018, Nagasaki, Japan
8. 3D simulation of hydride-assisted crack propagation in zircaloy-4 using XFEM
5th International Conference on Energy Engineering & Enivronmental Engineering (ICEEEE-2017), at Xiamen, China, 15-16 April 2017
9. Effects of Hydrogen on Thermal Creep of Zircaloy
5th International Conference on Nuclear and Renewable Energy Resources, Hefei, Anhui, China, 18-21 September 2016
10. Numerical Simulation of Influence of Precipitated Hydride on Crack Propagation in Zircaloy Fuel Cladding
5th International Conference on Nuclear and Renewable Energy Resources, Hefei, Anhui, China, 18-21 September 2016
11. Parametric study of a solar air heater with different rib geometries
12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, (HEFAT-2016), Costa del Sol, Spain, 11-13 July 2016
12. Transient Analysis of Microchannel Heat Sink during Single Phase and Flow Boiling Conditions
7th International Meeting on Advances in Thermofluids, Kuala Lumpur, Malaysia, 26-27 November 2014
13. A Comparative study of subcooled flow boiling in uniform, diverging cross-section and segmented finned microchannels
ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM-2014) Chicago, Illinois, USA, 3-7 August 2014
14. A Comparative study of subcooled flow boiling in uniform, diverging cross-section and segmented finned microchannels
ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM-2014) Chicago, Illinois, USA, 3-7 August 2014
15. Two-Phase VOF Model for the Refrigerant Flow through Adiabatic Capillary Tube (NY-14-005)
ASHRAE Winter Conference, New York, NY, January 18-22, 2014
16. Natural convection of viscoplastic fluids in an enclosure with localized heating and symmetrical cooling
ASME 2013 Summer Heat Transfer Conference (HT-2013), Minneapolis, USA
17. Metastable Flow inside Capillary Tubes: A Critical Review
ASHRAE Winter Conference, January 23-27, 2010, Orlando, FL, USA
18. Performance Prediction of Adiabatic Capillary Tubes by Conventional and ANN approaches- A Comparison
ASHRAE Winter Conference, January , 2009, Chicago, IL, USA
19. Experimental Investigation on the Flow of R-134a through Adiabatic and Diabatic Capillary Tubes
ASHRAE Winter Conference, January , 2009, Chicago, IL, USA
20. A Homogenous Flow Model for Adiabatic Helical Capillary Tube
ASHRAE Winter Conference, January, 2008 New York, NY, USA
21. Flow characteristics of HFC-134a in an adiabatic helical capillary tube
5th International conference on Heat transfer, Fluid Mechanics and Thermodynamics HEFAT, 1-4 July 2007,Sun City, South Africa
23. Numerical investigation on the porous electrode design and thermal management of a lithium-ion battery pack
27th National and 5th International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2023),IIT Patna, 14-17 December 2023
24. Effect of Womersley number on the hemodynamics of a stenotic carotid artery with heat generation
27th National and 5th International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2023),IIT Patna, 14-17 December 2023
25. Numerical evaluation of indirect liquid cooling of a Li-ion battery
27th National and 5th International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2023),IIT Patna, 14-17 December 2023
26. Flow boiling heat transfer enhancement through vapor venting technique in an open microchannel heat sink
27th National and 5th International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2023),IIT Patna, 14-17 December 2023
27. Modelling of Phase Change Material embedded Li-ion battery pack under different load conditions using Equivalent Circuit Model
9th International and 49th National Conference on Fluid Mechanics and Fluid Power (FMFP-2022), IIT Roorkee, 14-16 December 2022
28. Numerical investigation of the pulsatile flow of non-Newtonian biofluid through a rigid stenosed channel
9th International and 49th National Conference on Fluid Mechanics and Fluid Power (FMFP-2022), IIT Roorkee, 14-16 December 2022
29. Effects of wettability on the flow boiling heat transfer enhancement
9th International and 49th National Conference on Fluid Mechanics and Fluid Power (FMFP-2022), IIT Roorkee, 14-16 December 2022
30. Numerical Investigation of Li-ion battery pack with PCM based cooling using Equivalent Circuit Model
1st International conference on Advances in Heat Transfer and Fluid Dynamics (AHTFD-2022), AMU Aligarh, 1-3 December 2022
31. Flow boiling characteristics of bio-surfactant in open microchannel heat sinks
1st International conference on Advances in Heat Transfer and Fluid Dynamics (AHTFD-2022), AMU Aligarh, 1-3 December 2022
32. High temperature oxidation of pre-oxidized Zircaloy-4 cladding tube
International Conference on Characterization and Quality Control of Nuclear Fuels (CQCNF-2022),NFC Hyderabad, 17-19 November 2022.
33. Flow boiling heat transfer characteritics of eco-friendly surfact in microchannel heat sinks
International Chemical Engineering Conference (IChEC-2022), IIT Patna, 12-13 November 2022.
34. Scheffler reflector based solar water heater with Archimedean spiral coil absorber
25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019),IIT Roorkee, 28-31 December 2019.
35. Simplified design methodology for truncated compound parabolic concentrator
25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019),IIT Roorkee, 28-31 December 2019.
36. Combined Effects of Structured Surfaces and Surfactant in Pool Boiling Heat Transfer Enhancement
25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019),IIT Roorkee, 28-31 December 2019.
37. Thermohydraulic Performance of Single Stage and Multistage Conical Receiver Cavities
7th International and 45th National Conference on Fluid Mechanics and Fluid Power, IIT Bombay, India 10-12 December 2018.
38. Enhancement of a Closed Loop Two Phase Thermosyphon at High Heat Flux
7th International and 45th National Conference on Fluid Mechanics and Fluid Power, IIT Bombay, India 10-12 December 2018.
39. Transient Simulation of a Three Dimensional Single Pair of Thermoelectric Cooler
7th International and 45th National Conference on Fluid Mechanics and Fluid Power, IIT Bombay, India 10-12 December 2018.
40. Pool Boiling Heat Transfer Characteristics of a Plasma Sprayed Coated Surface
7th International and 45th National Conference on Fluid Mechanics and Fluid Power, IIT Bombay, India 10-12 December 2018.
41. Numerical investigation of microfluidic transport based on electrowetting of dielectric
24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), at BITS Pilani, Hyderabad, 27-30 December 2017.
42. A comparative study of subcooled flow boiling in uniform and segmented finned microchannel
24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), at BITS Pilani, Hyderabad, 27-30 December 2017.
43. Experimental Investigation of Pool Boiling Heat Transfer in Smooth and Enhanced Surfaces
Fluid Mechanics and Fluid Power (FMFP-2017), at Amrita University, Amritapuri, 14-16 December 2017
44. Effects of Hydrogen on Thermal Creep Behaviour of Zircaloy
3rd Indo-Austrian Symposium on 'Advances in Materials Engineering' (AME 2016), IIT Bombay, Mumbai, 19-20 December 2016
45. Influence of the Crack-tip Hydride on Fracture Parameters of Zircaloy-4
International Conference on Advanced Materials (SCICON-16), Amrita University, Coimbatore, 19-21 December 2016
46. Prediction of Bubble Lift-off Diameter in Sub-Cooled Flow Boiling
6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Motilal Nehru National Institute of Technology Allahabad, India 15-17 December 2016
47. 3D CFD Simulation of Solar Air Heater Artificially Roughened with Novel Hyperbolic Ribs
6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Motilal Nehru National Institute of Technology Allahabad, India 15-17 December 2016
48. Heat transfer Enhancement of Phase Change Material (PCM) with Nanoparticle for Thermal Storage System
6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Motilal Nehru National Institute of Technology Allahabad, India 15-17 December 2016
49. Natural Convection in a Square Enclosure with Transpiration and Ventilation Port
6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Motilal Nehru National Institute of Technology Allahabad, India 15-17 December 2016
50. A Review on Bubble Growth, Departure Diameter and Release Frequency in Pool Boiling
6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Motilal Nehru National Institute of Technology Allahabad, India 15-17 December 2016
51. Flow Visualization Study of Reverse Flow Phenomenon in Microchannel
6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Motilal Nehru National Institute of Technology Allahabad, India 15-17 December 2016
52. Understanding Influence of Hydride Precipitated at a Crack Tip on Crack Propagation in Zircaloy-4 Fuel Cladding using XFEM
IISc Bangalore, Bengaluru, 11-15 December 2016
53. Effects of hydride on crack propagation in zircaloy-4
11th International Symposium on Plasticity and Impact Mechanics (IMPLAST 2016) IIT Delhi, New Delhi, 11-14 December 2016
54. Prediction of Bubble Departure Diameter in Subcooled Flow Boiling
2nd International Conference on Thermal Energy and Environment,(INCOTEE 2016)
55. Investigation of Natural Convection in a Differentially Heated Room with Ventilation and Transpiration Port
lobal Conference on Renewable Energy (GCRE-2016), NIT Patna, India
56. Parametric Investigation of Artificially Roughened Solar Air Heater with Parabolic Rib Geometry
Global Conference on Renewable Energy (GCRE-2016), NIT Patna, India
57. Investigation of Flow Boiling Heat Transfer in Segmented finned Microchannels
23rd National and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC2015), ISRO Trivandrum, India
58. Thermal instabilities in convection of viscoplastic fluids
23rd National and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC2015), ISRO Trivandrum, India
59. Performance Analysis of Uniform and Expanding Cross-section Microchannels in Single Phase and Flow boiling Heat Transfer
5th International and 41st National Conference on Fluid Mechanics and Fluid Power, IIT Kanpur, Kanpur, India, December, 12-14, 2014
60. Experimental and numerical analysis of microchannel heat sink
Proceedings of International mechanical engineering congress, NIT Tiruchirappalli, India, June 12-15, 2014
61. Effects of surface wettability and cross section area on the evolution of an elongated bubble in a microchannel
40th National Conference on Fluid Mechanics and Fluid Power (2013), NIT Hamirpur
62. Numerical investigation of refrigerant flow through adiabatic capillary tube
22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference (2013), IIT Kharagpur
63. Convection heat transfer of yield stress fluids in an enclosure with eccentrically heated bottom wall
22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference (2013), IIT Kharagpur
64. Natural convection of yield stress fluids in a square enclosure with differentially heated side walls
2nd National Conference on Advances in Heat Transfer and Fluid Dynamics, 2013, AMU Aligarh
65. Natural convection of viscoplastic fluids in a square enclosure with localized heating from below and symmetrical cooling from sides
SERC School & Sixth National Symposium on Rheology of Complex Fluids, 2012, IIT Guwahati
66. An Experimental Investigation on Straight and Coiled Adiabatic Capillary Tubes
National Conference of Refrigeration and Air Conditioning (NCRAC), January 8-10, 2009, IIT Madras, India.
67. Experimental investigation on the performance of R-134a flowing through a straight capillary tube under adiabatic and diabatic flow conditions
19th National & 8th ISHMT - ASME Heat and Mass Transfer Conference January 3-5, 2008, JNTU, Hyderabad, India.
Textbook: Fluid Mechanics and Machinery
Oxford University Press, 2015
Chapter: Effects of Wettability on the Flow Boiling Heat Transfer Enhancement
Fluid Mechanics and Fluid Power, Volume 1. Springer, 2024
Chapter: Modelling of Phase Change Material Embedded Li-Ion Battery Pack
Fluid Mechanics and Fluid Power, Volume 1. Springer, 2024
Chapter: Refrigeration, Air Conditioning and Cold Storage
Handbook of Food Process Design, Wiley-Blackwell (UK), 2012